Zhejiang Ningmin Electromechanical Co., Ltd. 
HOME >> WQ Sewage Pump >> WQ NEW SEWAGE PUMP
  • WQ NEW SEWAGE PUMP

  • WQ NEW SEWAGE PUMP

    The WQ sewage submersible electric pump (hereinafter referred to as the electric pump) consists of three parts: a water pump, a seal, and an electric motor. The electric motor is located at the top of the pump and is a three-phase asynchronous motor. Double-end mechanical seals are used between the pump and the motor, and "O"-shaped oilresistant rubber seals serve as static seals at each fixed stop.

    • 0.00
      0.00
Product Description

The WQ sewage submersible electric pump (hereinafter referred to as the electric pump) consists of three parts: a water pump, a seal, and an electric motor. The electric motor is located at the top of the pump and is a three-phase asynchronous motor. Double-end mechanical seals are used between the pump and the motor, and "O"-shaped oilresistant rubber seals serve as static seals at each fixed stop.

The electric pump should operate continuously and normally under the following conditions:

1.The medium temperature should not exceed 40°C.

2.The PH value of the medium should be between 4-10.

3.The medium's density should not exceed 1200 kg/m3

4.The power frequency is 50Hz, and the voltage fluctuation range is 0.9-1.1 times the rated value.

5.The maximum diving depth should not exceed 5m.